Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals
Management System Certification:
ISO 9000
OEM/ODM Service
Sample Available

PE Part, PE1000 Part, Engineering Plastic UHMWPE PAR manufacturer / supplier in China, offering PE1000 Machined Part by CNC, SMT Carrier Pallet Material/ESD Durostone Sheet, Ricocel Wave Carrier with Long Life Cycles and so on.

Gold Member Since 2015

PE1000 Machined Part by CNC

Get Latest Price
Min. Order / Reference FOB Price
1 Piece US $10/ Piece
Port: Shenzhen, China
Production Capacity: 1, 000PCS/Week
Payment Terms: T/T, Western Union, Paypal
Material: UHMWPE
Color: White, Black, Red, Green, Yellow,etc
Processing Technic: Turning,Milling,Drilling,Sawing,etc
Size: as Per Drawing
FOB Port: Shenzhen
Lead Time: 7- 10 Working Days

You Might Also Like

Loading...

Basic Info

Model NO.: PR-PE-3
Trademark: PRIOR
Transport Package: by Cartons or Pallet
Specification: As per drawings
Origin: China
HS Code: 3920109090

Product Description

PE1000 machined part by CNC

In plastic field, many suppliers know the material, but they know little about the machining.
Some other suppliers know about the machining, but they don't know the material properties. In the two situations, problems happen frequently.
If you have same problem, come to PRIOR PLASTIC, we solve the problem for you perfectly. Experienced both in material and machining, customers are very glad to cooperate with us.
The machining process include below
1.Turning: For parts which have high surface requirement, wide-head cutters are better. When processing thin walled and soft material, cutters like knife are recommended.
2. Milling: When milling the surface, end-milling is more cost-effective than circular milling. For circular and forming cutter, it should have less than two cutter edges. In this case, the tolerance caused due to the edge vibration can be lowered to the minimum.  
3. Sawing: Thin saws are usually used to saw thick parts to avoid the heating caused by friction. It would be better to use sharp and big sawblade.
4. Drilling: When drilling the solid materials, make sure to use sharp drill, otherwise the increasing pressure during drilling will cause material cracks.
The common document files accepted are : *.pdf/*.dwg/*.IGS/*.step/*.prt/*.sldprt Just send the drawings to us, we will handle the rest for you.

UHMW characteristics
Outstanding Abrasion and Chemical Resistance
Highest Impact Strength of Any Plastic
Low Co-efficient of Friction
Nonstick, self-lubricating surface
Negligible Water Absorption
Wide useful Temperature Range -200°C to +80°C
Good Stress Crack Resistance
Light weight:15 Percent the weight of steel

Technical data sheet
PROPERTIESTest MethodUnitValue
I.Physical Properties
DensityISO 1183g/cm30.96
Water absorption 24hrsISO 62%0.01
II.Thermal Properties
Heat deflection temperature - HDT/AISO 75-2ºC42
Min. service temperature ºC-269
Max. service temperature-Long Term ºC90
Thermal conductivity at 23 ºCDIN 11359W/(K*m)0.42
Coefficient of linear thermal expansionISO 1135910-4*K-12
Flammability Rating(6mm thickness)UL 94-HB
III.Mechanical Properties at 23ºC
Tensile strength at yieldISO 527-2MPa17
Tensile strength at breakISO 527-2Mpa40
Elongation at breakISO 527-2%>50
Modulus of elasticity after tensile testISO 527-2MPa650
Modulus of elasticity after flexural testISO 178MPa800
Hardness - Shore DDIN 53505 61
Charpy impact strengthISO 179kJ/m2N. B.
Friction coefficientDIN 53375 0.25
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHzIEC 60250106Hz3.1
Dielectric loss factor at 1 MHzIEC 60250106Hz0.0001
Volume resistivelyIEC 60093Ohm (Ω) * cm>1014
Surface resisivelyIEC 60093Ohm (Ω)>1011
Dielectric strengthIEC 60243-1kV/mm45
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m

Send your message to this supplier

*From:
*To:
avatar Ms. Jessica Lee
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

People who viewed this also viewed