Gold Member Since 2015
Prior Plastic Co., Limited

HDPE Machined Part, HDPE Part, Plastic Product manufacturer / supplier in China, offering Customized PE Machined Part for Wear Resisting Application, Top Quality Fr4 Glass Fibre Sheet with 10^6~10^9 Resistivity, Textolite Cotton Laminate Phenolic Board and so on.

(/ )

Supplier Homepage Product Plastic Machined Parts Customized PE Machined Part for Wear Resisting Application

Customized PE Machined Part for Wear Resisting Application

FOB Price: US $10 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $10/ Piece
Get Latest Price
Port: Shenzhen, China
Production Capacity: 1, 000PCS/Week
Payment Terms: T/T, Western Union, Paypal

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: PR-HDPE-3
  • Color: White, Black, Red, Green, Yellow,etc
  • Customized: as Drawings or Samples
  • Density: 0.96g/cm3
  • Transport Package: by Cartons or Pallet
  • Origin: China
  • Material: HDPE
  • Processing Technic: Turning,Milling,Drilling,Sawing,etc
  • FOB Port: Shenzhen
  • Trademark: PRIOR
  • Specification: As per drawings
  • HS Code: 3920109090
Product Description
Customized PE machined part for wear resisting application

In plastic field, many suppliers know the material, but they know little about the machining.
Some other suppliers know about the machining, but they don't know the material properties. In the two situations, problems happen frequently.
If you have same problem, come to PRIOR PLASTIC, we solve the problem for you perfectly. Experienced both in material and machining, customers are very glad to cooperate with us.
The machining process include below
1.Turning: For parts which have high surface requirement, wide-head cutters are better. When processing thin walled and soft material, cutters like knife are recommended.
2. Milling: When milling the surface, end-milling is more cost-effective than circular milling. For circular and forming cutter, it should have less than two cutter edges. In this case, the tolerance caused due to the edge vibration can be lowered to the minimum.  
3. Sawing: Thin saws are usually used to saw thick parts to avoid the heating caused by friction. It would be better to use sharp and big sawblade.
4. Drilling: When drilling the solid materials, make sure to use sharp drill, otherwise the increasing pressure during drilling will cause material cracks.
The common document files accepted are : *.pdf/*.dwg/*.IGS/*.step/*.prt/*.sldprt Just send the drawings to us, we will handle the rest for you.

HDPE Characteristics
-Good fatigue and wear resistance
-Super low water absorption
-Cold resistant
-Good surface smoothness
-Good protection against stress cracking
- Low steam permeability
- Good electrical insulation
-Environmental friendly

Technical data sheet
PROPERTIESTest MethodUnitValue
I.Physical Properties
DensityISO 1183g/cm30.95~0.96
Water absorption 24hrsISO 62%0.01
II.Thermal Properties
Heat deflection temperature - HDT/AISO 75-2ºC55
Min. service temperature ºC-30
Max. service temperature-Long Term ºC90
Thermal conductivity at 23 ºCDIN 11359W/(K*m)0.42
Coefficient of linear thermal expansionISO 1135910-4*K-11.5
Flammability Rating(6mm thickness)UL 94-HB
III.Mechanical Properties at 23ºC
Tensile strength at yieldISO 527-2MPa27
Tensile strength at breakISO 527-2Mpa35
Elongation at breakISO 527-2%700
Modulus of elasticity after tensile testISO 527-2MPa1,000
Modulus of elasticity after flexural testISO 178MPa1,000
Hardness - Shore DDIN 53505 64
Charpy impact strengthISO 179kJ/m2N. B.
Friction coefficientDIN 53375 0.3
IV.Electrical Properties  at 23ºC
Dielectric constant at 1 MHzIEC 60250106Hz2.3
Dielectric loss factor at 1 MHzIEC 60250106Hz3.1
Volume resistivelyIEC 60093Ohm (Ω) * cm>1016
Surface resisivelyIEC 60093Ohm (Ω)>1015
Dielectric strengthIEC 60243-1kV/mm17
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m
Send your message to this supplier
Mr. Eric
To: Mr. Eric

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now